Application

                                 
 

 Jelly Filled Telephone Cables (JFTC)

                                         Solid PE Insulation
 Jelly Filled Polyethlene Telephone Cables (JFTC)
                                         Foam Skin Insulation
 Cable Aerial Self-supporting Telephone Cables
                                         Solid PE Insulation
 Cable Aerial Self-supporting Telephone Cables
                                         Foam/Skin Insulation
 Switch Board Cables, Shielded
                                         Solid PVC Insulation
 Networking Cables
                                        TIA/EIA Specification
 Pulse Code Modulation (PCM) Cables
                                         TEC/IEC/BS Specification
 Quad Cables (Jelly Filled & Dry)
                                         IRS/BS Specifaction
 

 

Tera Cables India Pvt. Ltd.

Top Management


Contact Person :
Prakash R. Soni (Group C.E.O.)

Village Kalana, P.O. Chharodi Farm,
Taluka - Sanand, Pin. 382 170.
Dist Ahmedabad (Gujarat) INDIA

Phone No. :
+91 - 2717 - 273152 / 273153 / 273154

E-mail : info@teracabindia.com
Web site : www.teracabindia.com

Sales & Marketing

Contact Person :
R.K. Nair (Manager – Exports & Marketing)

E-mail : mkt@teracabindia.com

  .....................................................................................

Armouring: In case of Armoured cables-
  Bedding of helical lapping of two Polythene tapes      applied with overlap to provide mechanical      protection to the sheath.

  Armour of double layer of galvanized steel tape of      required thickness applied helically with a gap not      more than 25+ 10% of the width of tape in each      layer. The second tape cover the gap of first tape      and overlap at least 15% on either side.
Jacket: The cable is jacketed with Virgin black    Polythene as per specification (ASTM D 1248).

Identification and Marking: On the finished cable    sheath / jacket the cable identification and marking    is done by embosing / printing as per the    requirment of customer / specification.

>> Jelly Filled Polyethlene Telephone Cables (JFTC) - Foam Skin      Insulation
........................................................................................................................
  • Application: VF Transmission digital system, Local Network,Public, Private and Industrial
  • Installation: Direct Burial in ducts.
  • Construction: The Cable is made up of:
  • Standards: Generally Complying to
         IEC 60708 - 1
         BT CW 1236
         BTCW 1128
         BTCW 1124
 
  • Conductor : Solid plain annealed high conductivity copper round wire of nominal dia 0.32, 0.4, 0.5, 0.65, 0.90 mm. As per IEC 28 & ASTM B3.
  • Insulation: Foam-Skin extruded Polythene insulation grade stablized. 100% Virigin material and coloured as per requirment ( As per BS 6234 ASTM D 1248).
  • Pair/Quad: Quad or two coloured insulated conuctors of specified colours twisted together with pre-dertrmined lay to form a pair. In orde to minimize the crosstalk.
  • Units(U): 10/20 pairs stranded and a open helical binder of polyester / PP/PE Tape of specified colours applied to form a unit.
  • Super Units (SU):

         Five Nos. - of 10 pairs twisted together to form - 50 pair super unit -             OR

         five Nos. - of 20 pairs units together to form 100 pair super unit.

         Each super unit have an open helical blnder of Polyester / PP/PE             tape of specified colour for identification.

         Spares pair added in each super unit as per requirements.

  • Cabling/Filling: For cables above 100 pairs cable the required number of super units are stranded to form a cable core.
          The cable core is fully filled with jelly (water resistance compound)              which is compatible with the insulation.
          The filled cable core is wrapped with a tape and the flodding              compound is applied.

  • Screen: A alminium tape coated both side with polythene is applied longitudinally with overlap over the cable core. The laminated alumium tape is sealed at the overlap to prevent moisture.
  • Sheath: The cable is sheated with Virgin black polythene compound and confirming to the requirment of the specification.(ASTMD 1248
 
Click for Technical Data
 
TERA Cab India

Tera Cab India offer wide ranges of cable as per various national and international Standards and provides their complete cabling solution, the manufacturing ranges of Tera Cab India are : Telecommunication Sector, Power Sector and Cable for Special Application.

 
 

Copyright © 2006
Tera Cables India Pvt. Ltd. All rights reserved

Site Developed by :: #1 Vinayak InfoSoft - #1 Ahmedabad Web Designing and Web Hosting Company